Hydro Tek

Authorized Dealer

Free break-in oil change.

Get Deatils

PARTS AND ACCESSORIES

CLEANING SOLUTIONS

HOT WATER PRESSURE WASHERS

SS Series: Mobile Wash Skids – Compact, Gas Powered, Diesel Heated

SS Series Mobile Wash Skids are gas driven, diesel fired hot water pressure washers featuring steel frames, stainless steel panels, & industrial components.

Rugged “Pro-tect-it” Frame:

Hydro Tek’s unique “Pro-tect-it” frame of 1¼”, heavy gauge steel, with durable electrostatically applied powder coat finish, can be truck or trailer mounted, pulled with the optional wheel kit, or left as a stationary skid.

Stainless Steel Panels:
These rugged and durable panels offer lifetime rust and corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come.

Simple to Use Controls:
Lighted rocker switch, thermostat and other controls are located on an easy to reach recessed panel to prevent damage.

Industrial Engines:
Efficient OHV, twin-cylinder gas engines with electric key start, oil filter, low oil shutdown, and cast iron cylinder for maximum duty and performance. Some models equipped with a durable diesel engine for enhanced longevity and efficient operation. Note: the GX390 Honda is a single cylinder engine.

Fuel Tanks:
Heavy Duty “roto-molded” rust free fuel tanks with fuel filter to protect against contaminated fuel. Safely refill fuel tanks away from hot engine. Extended run time (up to 8hrs.) eliminates interruptions. Note: the GX390 Honda has an integrated fuel tank.

Frame Mounted Unloader:
The unloader is frame mounted eliminating heat failures and vibration. Low flow models have pressure activated unloaders for consistent and dependable operation. Higher flow models have flow activated unloaders which allow pressure to build up gradually as trigger gun is activated eliminating “pressure spikes” and improving operator control and safety. When the gun is released, entire system pressure is relieved enhancing life of washer and eliminating engine starting problems.

SpiraLast™ Coil:
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Ask your dealer about the Lifetime Coil Warranty.

Flexible, high intensity 12V Diesel Burner System:
Sophisticated 12V burner system transforms available power from system to fire the diesel burner. This efficient burner system, with PowerLight ignitor, provides maximum burner performance. No outside power source is required. (See SCX Series for additional 12v skids)

Belt Drive or Direct Drive Pump:
These industrial triplex, ceramic plunger pumps are run at lower RPM to give maximum efficiency and longevity outperforming the competition. Pumps are located front and center for easy access. Belt drive models have the EZ Align™ belt tensioning system to allow for easy, single bolt, belt tensioning adjustments.

More Standard Features:

  • Burst disc technology for operator safety
  • Adjustable temperature up to 250ºF with steam setting (SS30008HG is adjustable to 200º, no steam setting)
  • Heavy duty wand & gun with nozzle storage, 50’ high pressure hose and quick release nozzles
  • Slide out, snap lid battery box

Additional features for SS35004VH: Flow activated burner delivers a hot water, low pressure rinse. Extra air band capacity for high altitude rating.

Model PSI GPM Temp. CC Engine
BELT DRIVE MODELS
SS30004VG 3000 4.0 250F 479 Vanguard Gas
SS30005VH 3000 4.8 250F 479 Vanguard Gas
SS30008HG 3000 7.3 200F 688 GX630 Honda Gas
SS35004VG 3500 4.0 250F 479 Vanguard Gas
SS35005VC 3500 4.6 250F 570 Vanguard Gas
SS35005VG 3000 4.8 250F 570 Vanguard Gas
SS35006VG 3500 5.5 250F 627 Vanguard Gas
SS35006HG 3500 5.5 250F 688 GX630 Honda Gas
SS40005VH 4000 4.8 250F 570 Vanguard Gas

SM Series: Compact, Portable, Gas Powered, Diesel Heated

The SM Series is a compact and portable hot water pressure washer. It is powered by a gas engine and ready for use wherever a water source is available. No electricity is required.  With a Spira Last coil and 12v burner you will quickly and efficiently heat water to effectively blast away grease and grime.  The SM Series includes airless tires to eliminate flats on a job site and is easy to maneuver with the integrated handles.  Stainless panel, coil enclosure, and rain guard are rust resistant and keep your machine looking great for years.  The SM Series is a value conscious choice in hot water pressure washers without sacrificing performance, features, and operator safety.

Rugged Steel Frame:

Hydro Tek’s 1¼”, heavy gauge steel frame is durable for rough terrain and has integrated handles for maneuverability. Ask your local distributor about a FREE stainless steel frame upgrade.

Stainless Steel Panel, Coil Housing, and Burner Cover:

These rugged and durable panels offer lifetime rust and corrosion resistance and keeps your machine looking like new for years to come.

Simple to Use Controls:

Lighted rocker switch, adjustable  thermostat, and other controls are located on an easy to reach panel. Includes panel mounted, resettable circuit breakers to protect the electrical system of your pressure washer.

Commercial Engines:

These single cylinder, air cooled, commercial Honda engines are fuel efficient and easy to start. Electric start engine on SM40004HH, Pull start engine on SM30003HH.

Open Frame Design:

The open design allows for quick access to all components for fast refueling and periodic maintenance.

Fuel Tanks:

The Honda engine powered wash skid has an integrated unleaded gasoline tank. The burner diesel tank is a heavy duty “roto-molded” rust free tank with fuel filter to protect against contaminated diesel fuel.

Nonintegrated, Remote Mounted Unloader:

The unloader is separate from the pump, nonintegrated, eliminating heat failure and vibration.

SpiraLast™ Coil:

The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and a stainless enclosure with double-wall end caps. Ask your dealer about the Lifetime Coil Warranty.

Portability:

The SM Series comes standard with four airless tires for moving the machine right to your wash site. Maneuver through glass, nails and other sharp job site objects worry & flat free.

Flexible, high intensity 12V Diesel Burner System:

Sophisticated 12V burner system transforms available power from system to fire the diesel burner. This efficient burner system, with

PowerLight ignitor, provides maximum burner performance. No outside power source is required.

Direct Drive Pump:

These industrial triplex, ceramic plunger pumps for a long life of industrial duty use.

More Standard Features:

Burst disc technology for operator safety, adjustable temperature up to 250ºF, heavy duty wand/gun, snap lid battery box, 50’ high pressure hose, and quick release nozzles.

Model PSI GPM CC Engine
SM30003HH 3000 3.0 270 GX270 Honda Gasoline Pull Start
SM40004HG 4000 3.5 389 GX390 Honda Gasoline Electric Start

 

HN Series: Stationary, Electric Powered, Natural Gas, LP or Diesel Heated

Made in the USA for industrial use, the HN Series is a stationary hot water pressure washer that is powered by electricity and heated by your choice of natural gas, propane or diesel. This allows you to install indoors and have hot water on demand in your wash bay at your facility. These models include stainless steel panels, industrial duty motors and pumps and a lifetime heating coil warranty.

Ready to work when you are:

No need to fill fuel tanks or hunt down a water supply when machine is directly plumbed into natural gas and water lines. The pressure washer can be housed indoors, away from the elements, while installing wash stations remotely outdoors.

Clean and Efficient Heating System:
24v automatic, electronic ignition on low emission natural gas burner. Liquid Propane conversion option or diesel heated option is available on any model.

SpiraLast™ Coil:
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Ask your dealer about the Lifetime Coil Warranty.

Belt Driven pump:
Low RPM drive – cooler, quieter, continuous duty performance. These industrial triplex pumps feature ceramic plungers for long life. EZ Align™ pump rail system for belt tensioning with a simple adjustment
bolt.

NEMA4 Water Tight Electrical Box:
ETL certified to UL1776 Class 2 for use in wash-down area, exceeds industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics. Standard
diagnostic indicators ensure optimal system performance. Dual voltage switch on most 230v models allows you to simply flip a switch to change to 208v power supply.

Bypass Cool System:
Worry free pump cooling system prevents pump from overheating with system designed pump bypass feature.

Durable Frame Construction:
Welded, powder coated steel, pro-tect-it frame for durability with rustproof stainless coil wrap and front panels. Forklift slots and overhead lifting points to safely reposition machine. Frame integrated hold down tabs.
Stainless steel frame option as well as an option for a removable, stainless back panel available.

Best in Class accessibility:
Easy-remove panels on an open frame design with open backside gives you full access to all components, including EZ Align™ belt tensioning system, electrical box, and burner igniter for efficient preventative maintenance checks.

More Standard Features:

  • Detergent flow metering at full pressure
  • Heavy duty industrial motor with standard thermal overload protection.
  • Adjustable temperature up to 250°F with steam setting
  • Burst disc technology for operator safety
  • Rustproof float tank to regulate incoming water ensuring consistent system performance
  • Heavy duty hose, wand, and trigger gun and quick connect nozzles
  • Remote Ready: Choose an on/off timer remote option or a full function remote option for complete control from the wash site.

Optional Accessories:
Wall mount hose reel, additional wash station remotes, draft diverter, full-feature wall mount remote, 30-min shut off timer, hour meter, downstream soap injection, stainless steel frame, stainless panel wrap kit

 

HN20004E2G 2000 3.9 250F 5 208/230v 1ph 20a
HN25004E2G 2500 3.8 250F 6.5 230v 1ph 29a
HN25004E3G 2500 3.8 250F 7.5 208/230v 3ph 22a
HN25004E4G 2500 3.8 250F 7.5 460v 3ph 11a
HN30004E2G 3000 3.9 250F 8 208/230v 1ph 37a
HN30004E2C 3000 3.9 250F 8 208/230v 1ph 42a
HN35005E3G 3500 4.3 250F 10 208/230v 3ph 29a
HN35005E3C 3500 4.3 250F 10 208/230v 3ph 29a
HN35005E4G 3500 4.3 250F 10 460v 3ph 15a
HN35005E4C 3500 4.3 250F 10 460v 3ph 15a
HN35006E3G 3500 5.5 200F 15 208/230v 3ph
HN35006E4G 3500 5.5 200F 15 460v 3ph

 

SC-X Series : Diesel Powered, Diesel Heated for Extreme Duty

The SC-X Series Hot Water Pressure Washers are self-contained Mobile Wash Skids designed with the extreme duty user in mind and includes extra features to make it suitable for use in harsh and remote environments. The SC-X is designed for extra duty industrial use. It is self-contained and requires no outside power. It utilizes larger gasoline or diesel engines and pumps than our “SC” and “SS” series washers for tackling the biggest jobs with higher water volume. High pressure, hot water spray is generated on demand by the diesel fired burner so you can achieve the best cleaning results on grease and grime anywhere your job requires.

Rugged Pro-Tect-It™ Frame:
An extra-large, rugged, powder-coated steel frame surrounds the entire machine protecting its vital components. This Pro-Tect-It chassis has 4-way forklift access as well as built in lifting eyes so the machine can be top lifted with a harness or crane and the eyes double as tie down points for safe transportation. Each frame has double wall steel engine mounts to absorb engine vibration for smooth performance and includes mounting holes to hold optional stainless hose reels.

Stainless Steel Panels:
The stainless panels and coil wrap offer lifetime rust resistance and protection while keeping your machine looking new for years to come. (Optional stainless frame and enclosure panels available)

High Output 12v Diesel Heating System:
The 12v burner uses dependable PowerLight technology for maximum burner performance and efficiency, heating quickly, up to 250°F, to efficiently clean extra tough grime. No outside power source needed.

SpiraLast™ Coil:
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Check out our Lifetime Coil Warranty.

High Output Industrial Engines:
Heavy duty, multi cylinder diesel engines are water cooled and include oil filtration and electric key start. A side mount muffler prevents water ingress and reduces engine vibration. Panel mounted engine condition indicator lights to monitor your engine temperature & oil pressure.

Belt Driven Pump:
High torque, V-belt driven pump, low RPM, cooler and quieter operation for continuous duty performance. EZ Align™ belt tensioning system allows for easy, single bolt, belt tensioning adjustments.

Extra Large Fuel Capacity, 36 gallons:
Heavy duty, “roto-molded”, rust free fuel tanks with frame mounted, water separating fuel filter to protect against contaminated fuel. Large fuel tanks extend run time, eliminating interruptions to refuel.

More Standard Features:
Burst disc technology, pressure and flow switches, high limit thermostat, and pressure relief valve for operator safety Adjustable thermostat up to 250ºF, hour meter, and lighted on/off switches are panel mounted for easy operator access.

Heavy duty gun and wand with nozzle storage, heavy duty 50’ hose, quick release nozzle set, snap close battery box.

High flow models are two-gun compatible. Simply add the two-gun kit option to use with two operators to get your job done faster

Mine Specifications:   Additional features for SCX30005-MS: 8 gallon float tank with low water shutdown, GeniSys flame-out safety control system for the burner, locking battery isolator switch, extended stainless front panel, emergency stop button, stainless drip/drain pan, total relief unloader.  Pump, engine, drive & heater coil are operated 25% less than max. ratings for prolonged life.

Oil & Gas Drilling Specifications:    Additional features for SCX30006-OS Hammerhead: Stainless steel frame, emergency air choke shutdown, stainless drip/drain pan

Model PSI GPM Temp. CC Engine
SCX30004D12 3000 4 250 F 599 Kubota Diesel
SCX30005-MS* 3000 5 250 F 599 Kubota Diesel
SCX30006-OS* 3000 5.5 250 F 599 Kubota Diesel
SCX30008D12 3000 7.8 250 F 719 Kubota Diesel
SCX35005D12 3500 4.7 250 F 599 Kubota Diesel
SCX35006D12 3500 5.5 250 F 599 Kubota Diesel

 

HP Series: Hot Water Pressure Washer – Portable Electric, Diesel Heated with Exceptional Heat Output

The portable HP Series hot water pressure washer delivers a balance of pressure, water flow and heat required for the fastest cleaning. A side-by-side demonstration will show that cleaning performance is determined more by the combination of water, heat and flow, not just pressure. The HP Series hot water pressure washer has the high capacity burner to accommodate high water flow and achieves a higher temperature rise than other washers and saves valuable time and effort. To save you even more time, it features auto on/off, remote downstream soap control and adjustable pressure, giving the operator control at the spray gun and saving pump components and wear. It even has full pressure steam setting to clean faster on heavy equipment, greasy floors, dirty walls, oily steel or any grime-ridden surface.

High Heat / High Flow System:
The balance of heat and flow increases your cleaning power providing a consistent superior performance. Auto ignition for peace of mind & ease of operation. High capacity diesel burner with higher temperature rise for faster cleaning.

SpiraLast™ Coil:
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Check out our lifetime coil warranty.

Auto Start and Time Delay Shutdown:
With HP Series Hot Water Pressure Washers the operator has total control over the system from the trigger gun. This added convenience not only saves time and effort, it reduces wear and overheating of the pump and produces an energy efficient system that outperforms the traditional manual on/off.

Stainless Steel Coil Housing, Frame and Panels:
Rust-proof durable panels offer corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come. Screw connects provide easy removal for full access to all major components and the ultimate in serviceability.

Adjustable Temperature with Steam Setting:
Front mounted controls allows quick and easy adjustments of temperature and steam settings with higher heat than comparable washers for your toughest cleaning applications.

NEMA4 – Water Tight Control Panel:
ETL certified to UL1776 Class 2, for use in wash-down area, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics. Dual voltage switch on most 230v models allows you to simply flip a switch to change to 208v power supply.

CAT Direct Drive Pump:
High torque, low RPM drive – cooler, quieter, continuous duty performance. These Industrial triplex pumps outperform the competition in longevity – featuring concentrically bored & polished, graphite impregnated ceramic plungers with advanced seal design.

Diesel Fuel Tank with filtration:
Heavy Duty “roto-molded” rust free fuel tank with water separating fuel filter to protect against contaminated fuel. Extended run time (up to 5 hrs) eliminates interruptions.

Chemical Injection:
Equipped with inlet soap injection combined with precision chemical metering valve and float tank to inject soap at full pressure for optimal cleaning effectiveness. Panel mounted controls enable the operator to vary the mixture of soap or other additives with ease.

Portability:
HP Series comes standard with four large tires mounted on stainless axles and two lift handles.

More Standard Features

  • Heavy duty industrial motor with thermal overload protection
  • Burst disc technology for operator safety
  • Insulated quick connect nozzles
  • 50’ of heavy duty high pressure hose
  • Stainless adjustable pressure wand and heavy duty trigger gun
  • Panel mounted hour meter
  • Heavy Duty Hose 50’, 250° Rated
  • Adjustable Pressure Wand
Model PSI GPM Temp. HP Voltage
HP20005E8 2000 4.2 250 F 6.5 208/230v – 1ph 30a
HP22005E2 2200 4.2 250 F 6.5 230v – 1ph 27a
HP30004E2* 3000 3.9 250 F 8 208/230v 1ph 34a
HP35005E3 3500 4.3 250 F 10 230v 3ph 28a
HP35005E4 3500 4.3 250 F 10 460v 3ph 13a

 

SC Series: Mobile Wash Skids – Self-Contained, Gas Powered, Diesel Heated

SC Series Mobile Wash Skids are Self-Contained pressure washers that are Gas Powered & Diesel Heated with Powder coated or stainless steel for durability.

Rugged “Pro-tect-it” Frame:
Hydro Tek’s unique “Pro-tect-it” frame of 1¼”, heavy gauge steel, with durable electrostatically applied powder coat finish. Tie down brackets / 4-point lifting eyes as well as hose reel mounting holes incorporated into the frame.

Stainless Steel Panels:
These rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come.

SpiraLast™ Coil and Heating System:
A 110v oil fired burner is paired with the Hydro Tek manufactured SpiraLast™ heating coil for an efficient heating system. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Ask your dealer about the Lifetime Coil Warranty.

Industrial Engines:
Efficient OHV gas engines with electric key start, low oil shutdown, and cast iron cylinder for maximum duty and performance. Some models equipped with a durable, water-cooled diesel engine with key-switch shutdown, for enhanced longevity and single fuel source.

Fuel Tanks:
Heavy Duty “roto-molded” rust free fuel tanks with fuel filter to protect against contaminated fuel. Extended run time (up to 8hrs.) eliminates interruptions. High capacity 8 gallon gas and 18 gallon diesel fuel tank decrease refueling and operator down time.

Total Relief Unloader – Remote Mounted:
Flow sensitive unloader allows pressure to build up gradually as trigger gun is activated eliminating “pressure spikes” and improving operator control and safety. When the gun is released, entire system pressure is relieved, enhancing system life and eliminating engine starting problems. The unloader is panel mounted eliminating heat failure and vibration. Balanced regulating unloader on 2-gun systems.

NEMA4- Water Tight Control Panel:
ETL certified to UL1776 Class 2, for use in wash-down area, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics.

2 Gun Compatible:
(Refer to specifications chart for available models)
Allows the operator to operate two pressure guns simultaneously, creating a multi-purpose machine, increasing efficiency and time. Unique split flow design balances pressure spikes. The adjustable flow feature also allows the operator to conserve water when needed

110v Diesel Fired Burner with On-Board 2900 watt Generator:
Provides automatic, high intensity ignition and reliable power for the heating system. Supplemental power from the generator offer the operator the option to run lights or accessories.

Belt Driven Pump:
V-belt driven pump, low RPM drive – cooler and quieter operation for continuous duty performance. EZ Align™ belt tensioning system allows for easy, single bolt, belt adjustments.

More Standard Features:
Burst disc technology for operator safety
Adjustable thermostat
Heavy duty gun and wand with insulated quick couplers, 3 or more nozzles, nozzle storage, 50’ hose, snap top battery box
Hour meters are included on diesel models

Unmatched Durability: The SC is a proven model manufactured and refined for over two decades.

 

SC30004VG 3000 4.0 250°F 479 Vanguard Gas
SC30006VH 3000 5.5 250°F 570 Vanguard Gas
SC30008HG* 3000 7.8 200°F 688 GX630 Honda Gas
SC35005VH 3500 4.8 250°F 570 Vanguard Gas
SC35005VG 3500 4.7 250°F 570 Vanguard Gas
SC35005VC 3500 4.5 250°F 570 Vanguard Gas
SC35006VG 3500 5.5 250°F 627 Vanguard Gas
SC35006HG 3500 5.5 250°F 688 GX630 Honda Gas
SC30009KAF** 3000 8.7/2 200°F 725 Kohler Gas
SC35008HAF** 3500 7.7/2 200°F 688 GX690 Honda Gas
SC35008KAF** 3500 7.7/2 200°F 725 Kohler Gas

 

HD Series: Compact, Portable, Electric Powered, Diesel Heated

Hydro Tek HD Series: Compact, Portable, Electric Powered, Diesel Heated

SpiraLast™ Coil:
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Ask your dealer about the Lifetime Coil Warranty.

High Intensity Diesel Burners & Efficient Heating System:
The ultimate balance of power and efficiency. Provides economical operation with consistent superior performance. Auto ignition adds peace of mind & ease of operation.

Stainless Steel Coil Housing, Frames and Panels:
Not just decorative flashes, these rugged and durable panels offer rustproof protection of your valuable investment from the harshest environments. Remove panel for full access to all major components. HD Direct Drive units have open backside for easy service access.

Fuel Tank with Filtration:
Heavy Duty “roto-molded” rust free fuel tanks with fuel filter to protect against contaminated fuel. Large fuel tanks extend run time and reduce interruptions.

Adjustable Temperature:
Panel mounted adjustable temperature knob with steam setting increases cleaning effectiveness.

More Standard Features
Adjustable pressure unloader
Safety relief valve, burst disc technology and temperature limit switch
50’ hose, gun and wand included.Nozzles for various applications
Heavy duty industrial motor with standard thermal overload protection
Low speed motor on both HD15002E1 models
NEMA4-Water tight control panel with lighted switches
Heavy duty, large tires and four handles for enhanced mobility.

HD Series Hot Water Pressure Washer Direct Drive Models

Automatic Start-up & Shut-down
(applies to HD15002E1-ITS, HD22004E2H, HD27004E2H)
Operator has total control over the system from the trigger gun. This added convenience not only saves time and effort, it reduces wear and overheating of the pump, prevents the pump from running dry and produces an energy efficient system.

Downstream Chemical Injection:
The direct drive models are equipped with downstream chemical injection that can be turned on and off right from the gun – no need for the operator to return to the machine. Chemicals and other additives are introduced after the pump eliminating the risk of pump damage.

HD Belt Drive Models

Inlet Chemical Injection:
The belt drive models are equipped with inlet soap injection combined with precision chemical metering valve and float tank to inject soap at full pressure for optimal cleaning effectiveness. Panel mounted controls enable the operator to vary the mixture of soap or other additives with ease. Optional downstream injection available.

Belt Driven Pump:
V-belt drive pump with low RPM drive – cooler, quieter, continuous duty performance. EZ Align™ belt tensioning system allows for easy belt adjustment with a single adjustment bolt, no need to reach underneath the washer.

Bypass Cool System:
Pump cooling system utilizes the float tank as a radiator to prevent the pump from overheating in bypass for worry free operation if the washer is accidently left running.

HD Steamer
The HD35015E1H Steamer reaches temperatures up to 320ºF at a low 350psi for a true wet-steam washer. Includes an insulated open gun, 36” wand, 50’ wire braid combo steam hose, and a steam fan nozzle.

Direct Drive Model PSI GPM Temp HP Voltage
HD15002E1 1500 2 250 2 115v 1ph 20a
HD15002E1-ITS 1500 2 250 2 115v 1ph 20a
HD22004E2H 2200 3.5 250 5 280/230 1PH 24a
HD27004E2H 2700 3.5 250 6.5 230v 1ph 27a
Steamer PSI GPM Temp HP Voltage
HD35015E1H 350 1.75 320º F 1.5 115v – 1ph – 15a
Belt Drive Model PSI GPM Temp HP Voltage
HD10003E1G 1000 2.8 250 2 115v 1ph 20a
HD20004E2G 2000 3.5 250 5 208/230v – 1ph 24amp
HD25004E2G 2500 3.6 250 6.5 230v – 1ph 27amp
HD30003E2G 3000 3.2 250 6.5 230v – 1ph 27amp
HD30004E2G 3000 3.9 250 8 208/230v – 1ph 36amp

 

COLD WATER PRESSURE WASHERS

CPS Series: Cold Water Pressure Washer

The CPS Series cold water pressure washer is the versatile, full-featured, choice in heavy duty cold-water pressure washers. The smooth running engine is equipped with pressure lubrication, oil filtration and a large fuel tank. The CPS Series is perfect for jobs requiring high pressure and high mobility: On-site equipment cleaning and auto-detailing, graffiti removal, paint preparation, moss and mildew removal from sidewalks and decks, wet sandblasting and more. This CPS Series cold water power washer is an excellent companion tool for the professional who wants performance and durability.

Long Life:
Built with the same chassis design & components as our proven hot water wash skids.

Rugged “Pro-tect-it” Frame:
Hydro Tek’s unique “Pro-tect-it” frame of heavy gauge steel, with durable electrostatically applied powder coat finish give greater protection to engine and other vital components. Heavy duty 1¼” structural tubing frame, with built-in lifting bars, offers flexible mounting options: trailer, tank skid, stationary, or add a wheel kit for a portable washer.

Industrial Engines:
Smooth running twin cylinder gas engine. Overhead valve, pressure lubrication, and oil filtration along with reserve horsepower delivers 50% longer life than single cylinder powered washers. Electric start, low oil shutdown engine starts with the turn of a key and shuts off automatically if oil pressure drops. (GX390 Honda has a single cylinder and CPS35004HGP is a pull start ).

Panel Mounted Unloader:
The unloader is frame mounted eliminating heat failures and vibration and is a pressure activated unloader for consistent and dependable operation.

Belt Drive Pump:
Low RPM drive pump runs cooler and quieter for continuous performance. These industrial triplex, ceramic plunger pumps outperform the competition in longevity.

EZ Align™ Belt System:
Tensioning system allows for easy belt adjustment with a single adjustment bolt. If you need to remove the pump for preventative maintenance, it is as simple as removing bolts, no need to reach underneath the washer.

Remote Fuel Tanks:
They have a high capacity, 8 gallon fuel tank which is located away from the engine reducing risk of fire from gas spills. This extra capacity tank extends running time between fill-ups. *GX390 Honda has a 6.4qt tank integrated into engine

More standard features:

  • Nozzles with insulated quick couplers
  • Heavy-duty, 50’ high pressure hose
  • Heavy duty, insulated wand with trigger gun
  • Twist coupler hose connection to easily remove gun/wand for storage or to add additional lengths of hose
Model PSI GPM CC Engine
CPS30005HH 3000 4.7 389 GX390 Honda Gas
CPS30005VH 3000 5.2 479 Vanguard Gas
CPS30008VG 3000 7.5 627 Vanguard Gas
CPS300010HG 3000 9.5 688 GX690 Honda Gas
CPS35005VC 3500 4.5 479 Vanguard Gas
CPS35005VG 3500 4.5 479 Vanguard Gas
CPS35006VG 3500 5.5 570 Vanguard Gas
CPS40005VC 4000 4.5 570 Vanguard Gas

 

CPX Series: Cold Water Diesel Pressure Washer

 

CPX Series: Built for the Extreme Duty User

Extra Long Life:

Built with the same technology and industrial components that we put into our hot water diesel skids.

Rugged Pro-tect-it™ Frame:
An extra-large, rugged, powder-coated steel frame surrounds the entire machine protecting its vital components. Each frame has double wall steel engine mounts to absorb engine vibration for smooth performance. Includes mounting holes to hold multiple optional stainless hose reels to store both high pressure and garden hose. Flexible mounting options include: trailer, tank skid, stationary, or add a wheel kit for portability.

High Output Industrial Engines:
The CPX Series includes Heavy duty, multi cylinder diesel engines are water cooled and include oil filtration and electric key start. A side mount muffler prevents water ingress. Panel mounted engine condition indicator lights to monitor your engine temperature & oil pressure.

Panel Mounted Unloader:
The unloader is panel mounted away from the pump and engine eliminating heat failures and vibration. It is pressure activated for consistent and dependable operation.

Belt Drive Pump:
V-belt driven pump with low RPM drive runs cooler and quieter for continuous duty performance. These industrial triplex, ceramic plunger pumps outperform the competition in longevity.

EZ Align™ Belt System:
Tensioning system allows for easy belt adjustment with a single adjustment bolt. If you need to remove the pump for preventative maintenance, it is as simple as removing bolts, no need to reach underneath the washer.

Remote Fuel Tanks:
Large 8 gallon fuel tank is located away from the heat of the engine in the CPX Series. Extra capacity tank extends running time, less wasted time spent on fill-ups.

More Standard Features:

  • Stainless steel control panel and belt guard
  • Nozzles with insulated quick couplers (twist on for CPX50005)
  • Heavy-duty, 50’ high pressure hose
  • Heavy duty, insulated wand with trigger gun
  • Twist coupler hose connection to easily remove gun/wand for storage or to add additional lengths of hose
  • Snap top battery box fits full size group 24 battery
  • High flow CPX Series models are two-gun compatible. Simply add the two-gun kit option to use with two operators to get your job done faster
Model PSI GPM CC Engine
CPX30004D 3000 4 599 Kubota Diesel 2 cylinder
CPX30008D 3000 7.8 719 Kubota Diesel 3 cylinder
CPX35006D 3000 5.5 599 Kubota Diesel 2 cylinder
CPX50005D  5000 5  719 Kubota Diesel 3 cylinder

 

Trailer / Tank Skids

Hydro Tek Tow & Stow Transporter

 

 

  • Small footprint:  Takes up only 7’ x 4’ of storage space
  • Modular design:  choose either the 200 gallon (T185TW) or 270 gallon (T270TW) tank skid and any SS or CPS pressure washer skids
  • Maneuverable: Pivoting front axle to pull between buildings or on sidewalks
  • Auto wheel lock: When tongue/hitch is lifted to the upright storage position
  • Ships fully assembled: Pressure washer and reels installed
  • Maximum 10mph.  Transporter is intended to be used and stored on site, not for public roads.

ProTowWash® Portable Commercial Pressure Washer Trailers

 

 

Hydro Tek has been a pioneer in manufacturing commercial trailer pressure washers. Hydro Tek ProTowWash™ pressure washer trailers are engineered and designed specifically for industrial and commercial applications to compliment a hot or cold water industrial & commercial pressure washer. A trailer mounted pressure washer allows you to offer additional services and functionality that you do not have with a standard unit. The portable pressure washer trailer allows you to take your pressure washing equipment directly to your job site, regardless of how remote it might be. It is a completely self-contained package with a water tank and trailer mounted pressure washer. Each portable pressure washer trailer is completely customize-able for your specific cleaning job.The ProTowWash™ trailer mounted pressure washer is your mobile solution that hooks up quickly and promotes a professional image of your business.

Powder Coated Steel Frame:
The frame is constructed with a heavy-gauge steel structural tube spine for extra rigidity.

Suspension:
Torflex axles deliver up to 300% more wheel travel than leaf spring axles to create a smooth ride over rough terrain. This adds to the life of your pressure washer and reduces fatigue on your tow vehicle. T300EE, T400EE, T500EE pressure washer trailers have electric brakes on both axles to comply with commercial use D.O.T.

Tank:
Choose from pressure washer trailers with 200 gallons up to 540 gallons of water storage. Hydro Tek’s exclusive seamless polyethylene supply tanks with hold down straps provide secure water storage. Dual tanks on the 400 and 540 gallon trailer provide baffling to reduce water sloshing and also allows for the water tank to be split to carry two different types of fluid. Pump Seal Saver Bypass installed on most commercial trailer mount pressure washers to recirculate cool water from the bulk tank into your pressure washer pump.

Lights/Wiring:
Tail lights are water tight sealed and recessed for added protection from road hazards. All wiring is routed through the trailer spine to eliminate damage from road hazards. Electric brake pressure washer trailers have a brake controller ready 7-prong plug.

Storage:
The integrated storage tube for spray wands and large (47”x22”x10”) storage box at the rear of the portable trailer offers ample area to store wands, hoses and other accessories. Additional storage options available.

Coupler/Chains/Jack:
Save time every time you hook up the trailer to your tow vehicle with an oversized wheel that allows for easy movement of the trailer. All  trailer mounted pressure washers include safety chains and a wheeled jack that quickly swings up and out of the way.

Water Filter/Valves/Hoses:
High capacity water filter with 1½” water drain valve supplies clean water to the pump to increase pump life. Complete plumbing and hoses, sized properly to your Hydro Tek commercial pressure washer, are included. Hoses are routed through grommets in the trailer frame to protect from chaffing and road hazards. High water tank shutoff included.

Customize your commercial trailer pressure washer with your choice of accessories:
3-way ball valve, Stainless hose reels, Light bar, Bucket/chemical rack, Chrome wheels, sand hopper, chemical tank, Custom trailer color, alternate hitch choices, additional storage options, Hydro Vacuum wastewater filtration systems.

Model Capacity Axle GVWR Brakes Length
T200N 200 Gal. Single 3500# None 125”
T200E 200 Gal. Single 3500# Electric 125”
T250E (for SS) 270 Gal. Single 3500# Electric 125”
T300N 270 Gal. Tandem 4400# None 130”
T300S 270 Gal. Tandem 4400# Surge 130”
T300EE 270 Gal. Tandem 4400# Electric 130”
T400S 400 Gal. Tandem 6000# Surge 156”
T400EE 400 Gal. Tandem 6000# Electric 156”
T500S 540 Gal. Tandem 7000# Surge 168”
T500EE 540 Gal. Tandem 7000# Electric 168”

Hydro Tek Tank Skid Mounted Pressure Washers


 

 

Mount It:

  • Truck Bed
  • Pick-up
  • Van
  • Shop
  • Trailer frame

ANYWHERE !
(easy 4 Bolt Installation)

The Hydro Tek Tank Skid features a 185 or 270 Gallon Water tank, fully plumbed for ‘out of the box’ use, built-in water filtration, a rugged steel frame—protected by durable electrostatically applied textured powder coat finish—mounted with your machine selection.

Each of the Tank Skids has been engineered to match up with either an SM, SS or SC Series Hydro Tek Pressure Washer. (Please specify machine when ordering to ensure proper plumbing. Tank skid and machine qualifies an one unit toward free freight program – call for details)

 BOLT and Go Convenience!

No need for costly or custom installation jobs. The water tank and pressure washer are already securely attached to the tank skid frame. Simply bolt to the floor. This versatile Tank Skid allows pressure washing at remote sites where a water supply may not be available or convenient. The tank skid’s compact design allows several options for mounting: between the wheel wells of a standard pick-up, mounted side-by-side or across on an 8’ wide flatbed, or installed in an enclosed trailer. An added advantage is the convenience of being able to unbolt and remove the skid to free up your trailer or truck. Your dealer can assist with mounting optional equipment to your truck as needed.

 

Model Capacity Length
T185T 200 Gal. For CPS, SS, SC, and SCU Series 74″
T270T 270 Gal. For CPS, SS, SC, and SCU Series 80″

 

Brands We Offer

Buy your accessories  in bulk and save.

Add more profit to your bottom line.

Search By Categories

PRESSURE WASHERS

CLEANING SOLUTIONS

PARTS & ACCESSORIES

Call Today
Open: Monday - Friday | 8am - 5pm

2813 Richland Ave. Metairie, LA 70002

HOLIDAY HOURS

Nov. 28  CLOSED

Nov. 29  CLOSED

DEC. 24  8AM - NOON

DEC. 25  CLOSED

DEC. 31  8AM - NOON

JAN. 1  CLOSED

Call Now ButtonCall Now